Title: CSS Basic User Interface Module Level 4
ED: https://drafts.csswg.org/css-ui-4/
Status Text: This specification will include and extend CSS Basic User Interface Module Level 3. [[CSS-UI-3]]
TR: https://www.w3.org/TR/css-ui-4/
Previous Version: https://www.w3.org/TR/2021/WD-css-ui-4-20210316/
Previous Version: https://www.w3.org/TR/2020/WD-css-ui-4-20200124/
Previous Version: https://www.w3.org/TR/2020/WD-css-ui-4-20200102/
Previous Version: https://www.w3.org/TR/2017/WD-css-ui-4-20171222/
Previous Version: https://www.w3.org/TR/2015/WD-css-ui-4-20150922/
Shortname: css-ui
Level: 4
Status: ED
Group: csswg
Work Status: Revising
Editor: Florian Rivoal, On behalf of Bloomberg, https://florian.rivoal.net/, w3cid 43241
Abstract: This specification describes user interface related
	properties and values to style HTML and XML (including XHTML).
	It includes and extends user interface related features
	from the properties and values of previous CSS levels.
	It uses various properties and values
	to style basic user interface elements in a document.
At risk: Applicability of 'user-select' to ''::before'' and ''::after''
Can I Use URL: https://drafts.csswg.org/css-ui-3/
Can I Use URL: http://drafts.csswg.org/css-ui-3/
Can I Use URL: https://drafts.csswg.org/css-ui/
Can I Use URL: http://drafts.csswg.org/css-ui/
Can I Use URL: https://www.w3.org/TR/css-ui-3/
Can I Use URL: http://www.w3.org/TR/css-ui-3/
Can I Use URL: https://www.w3.org/TR/css3-ui/
Can I Use URL: http://www.w3.org/TR/css3-ui/
Can I Use URL: https://drafts.csswg.org/css-ui-4/
Can I Use URL: http://drafts.csswg.org/css-ui-4/
Can I Use URL: https://www.w3.org/TR/css-ui-4/
Can I Use URL: http://www.w3.org/TR/css-ui-4/
Ignore Can I Use URL Failure: https://drafts.csswg.org/css-ui-3/
Ignore Can I Use URL Failure: http://drafts.csswg.org/css-ui-3/
Ignore Can I Use URL Failure: https://drafts.csswg.org/css-ui/
Ignore Can I Use URL Failure: http://drafts.csswg.org/css-ui/
Ignore Can I Use URL Failure: https://www.w3.org/TR/css-ui-3/
Ignore Can I Use URL Failure: http://www.w3.org/TR/css-ui-3/
Ignore Can I Use URL Failure: https://www.w3.org/TR/css3-ui/
Ignore Can I Use URL Failure: http://www.w3.org/TR/css3-ui/
Ignore Can I Use URL Failure: https://drafts.csswg.org/css-ui-4/
Ignore Can I Use URL Failure: http://drafts.csswg.org/css-ui-4/
Ignore Can I Use URL Failure: https://www.w3.org/TR/css-ui-4/
Ignore Can I Use URL Failure: http://www.w3.org/TR/css-ui-4/
urlPrefix: https://html.spec.whatwg.org/multipage/; spec:HTML
	text:password; type:attr-value; for:input/type; url: input.html#attr-input-type-password-keyword

Introduction

This module describes CSS properties which enable authors to style user interface related properties and values. Section 2.1 of CSS1 [[CSS1]] and Chapter 18 of CSS2 [[CSS21]] introduced several user interface related properties and values. User Interface for CSS3 (16 February 2000) introduced several new user interface related features. [[CSS-UI-3]] was later introduced to incorporate, extend, and supersede these. This specification continues this work, and in turn replaces [[CSS-UI-3]].

Purpose

The purpose of this specification is to achieve the following objectives:

Module Interactions

This document defines new features not present in earlier specifications. In addition, it replaces and supersedes [[!CSS-UI-3]], which itself replaced and superseded the following: Note: The 'box-sizing' property was previously defined in this section of the specification, but has been moved to [[CSS-SIZING-3#box-sizing]]. Note: The 'text-overflow' property was previously defined in this section of the specification, but has been moved to [[CSS-OVERFLOW-3#text-overflow]].

Value Definitions

This specification follows the CSS property definition conventions from [[!CSS21]] using the value definition syntax from [[!CSS-VALUES-3]]. Value types not defined in this specification are defined in CSS Values & Units [[!CSS-VALUES-3]]. Combination with other CSS modules may expand the definitions of these value types. In addition to the property-specific values listed in their definitions, all properties defined in this specification also accept the CSS-wide keywords as their property value. For readability they have not been repeated explicitly.

Outline properties

At times, style sheet authors may want to create outlines around visual objects such as buttons, active form fields, image maps, etc., to make them stand out. Outlines differ from borders in the following ways:
  1. Outlines do not take up space.
  2. Outlines contribute to the [=ink overflow area=] of an element.
  3. Outlines may be non-rectangular.
  4. UAs often render outlines on elements in the '':focus-visible'' state.
The outline properties control the style of these dynamic outlines. The stacking of the rendering of these outlines is explicitly left up to implementations to provide a better user experience per platform. This supersedes the stacking of outlines as defined in Appendix E of CSS 2.1 [[CSS21]]. Keyboard users, in particular people with disabilities who may not be able to interact with the page in any other fashion, depend on the outline being visible on elements in the '':focus-visible'' state, thus authors must not make the outline invisible on such elements without making sure an alternative highlighting mechanism is provided. The rendering of applying transforms to outlines is left explicitly undefined.

Outlines Shorthand: the 'outline' property

	Name: outline
	Value: [ <<'outline-color'>> || <<'outline-style'>> || <<'outline-width'>> ]
	Applies to: all elements
	Inherited: no
	Percentages: N/A
	
The 'outline' property is a shorthand property and sets all three of 'outline-style', 'outline-width', and 'outline-color'. In the ambiguous case where a lone ''outline-style/auto'' value is specified, or if ''outline-style/auto'' is specified together with an <<'outline-width'>> value, but without an explicit <<'outline-style'>> or <<'outline-color'>> value, both 'outline-style' and 'outline-color' are set to ''outine-style/auto''. The outline created with the outline properties is drawn "over" a box, i.e., the outline is always on top and doesn't influence the position or size of the box, or of any other boxes. Therefore, displaying or suppressing outlines does not cause reflow. Outlines may be non-rectangular. For example, if the element is broken across several lines, the outline should be an outline or minimum set of outlines that encloses all the element's boxes. Each part of the outline should be fully connected rather than open on some sides (as borders on inline elements are when lines are broken). The parts of the outline are not required to be rectangular. To the extent that the outline follows the border edge, it should follow the 'border-radius' curve. The position of the outline may be affected by descendant boxes. The dimensions of the drawn outline contribute to the [=ink overflow area=] of an element. User agents should use an algorithm for determining the outline that encloses a region appropriate for conveying the concept of focus to the user. Note: This specification does not define the exact position or shape of the outline, but it is typically drawn immediately outside the border box. Note: The outline is the same on all sides. In contrast to borders, there are no ''outline-top'', ''outline-left'', etc. properties. This specification does not define how multiple overlapping outlines are drawn or how outlines are drawn for boxes that are partially obscured behind other elements.
Here's an example of drawing a thick outline around a BUTTON element:

		button { outline: thick solid }
		
Graphical user interfaces may use outlines around elements to tell the user which element on the page has the focus. These outlines are shown in addition to any borders, and switching outlines on and off should not cause the document to reflow. The focus is the subject of user interaction in a document (e.g. for entering text or selecting a button).
For example, to draw a thick black line around an element when it has the focus, and a thick red line when it is active, the following rules can be used:

		:focus  { outline: thick solid black }
		:active { outline: thick solid red }
		
Note: Since the outline does not affect formatting (i.e., no space is left for it in the box model), it may well overlap other elements on the page.

Outline Thickness: the 'outline-width' property

	Name: outline-width
	Value: <>
	Initial: medium
	Applies to: all elements
	Inherited: no
	Percentages: N/A
	Computed value: absolute length, [=snapped as a border width=]; ''0'' if the outline style is ''border-style/none''.
	Animation type: by computed value
	
The 'outline-width' property accepts the same values as 'border-width' ([[css-backgrounds-3#border-width]]), with the same meaning.

Outline Patterns: the 'outline-style' property

	Name: outline-style
	Value: auto | <>
	Initial: none
	Applies to: all elements
	Inherited: no
	Percentages: N/A
	Computed value: specified keyword
	Animation type: by computed value
	
<> accepts the same values as <> ([[css-backgrounds-3#border-style]]) with the same meaning, except that hidden is not a legal outline style. In addition, the 'outline-style' property accepts the value ''outline-style/auto''. The ''outline-style/auto'' value permits the user agent to render a custom outline style, typically a style which is either a user interface default for the platform, or perhaps a style that is richer than can be described in detail in CSS, e.g. a rounded edge outline with semi-translucent outer pixels that appears to glow. User agents may enable authors to influence the rendering of ''outline-style/auto'' style outlines via the 'outline-color' property, but this specification does not define how the rendering is impacted (if at all). The 'outline-width' property is ignored when 'outline-style' is ''outline-style/auto''. User agents may treat ''outline-style/auto'' as ''outline-style/solid''. css/css-ui/outline-auto-width-001.html

Outline Colors: the 'outline-color' property

	Name: outline-color
	Value: auto | [ <> | <> ]
	Initial: auto
	Applies to: all elements
	Inherited: no
	Percentages: N/A
	Computed value: see below
	Animation type: by computed value
	
The 'outline-color' property accepts all values of <'border-color'>, as well as the following keywords:
auto
When 'outline-style' is ''outline-style/auto'', ''outline-color: auto'' computes to ''outline-style/auto'' and represents the [=accent color=]. Otherwise, ''outline-color: auto'' computes to ''currentColor''.
See [[css-color-4#resolving-color-values]] for the computed value of <> values, and [[css-images-4#stripes]] for <> values.
Earlier versions of this specification had an additional invert value, performing a color inversion on the pixels on the screen. This is no longer supported, and was removed for lack of implementations (and of intent to implement) in modern user agents. See [[css-ui-3#outline-color]] for details.

Offsetting the Outline: the 'outline-offset' property

By default, the outline is drawn starting just outside the border edge. However, it is possible to offset the outline and draw it beyond the border edge.
	Name: outline-offset
	Value: <>
	Initial: 0
	Applies to: all elements
	Inherited: no
	Percentages: N/A
	Computed value: absolute length
	Animation Type: by computed value
	
If the computed value of 'outline-offset' is anything other than 0, then the outline is outset from the border edge by that amount.
For example, to leave 2 pixels of space between a focus outline and the element that has the focus or is active, the following rule can be used:

		:focus,:active  { outline-offset: 2px }
		

Negative values must cause the outline to shrink into the border box. Both the height and the width of the outside of the shape drawn by the outline should not become smaller than twice the computed value of the 'outline-width' property to make sure that an outline can be rendered even with large negative values. User agents should apply this constraint independently in each dimension. If the outline is drawn as multiple disconnected shapes, this constraint applies to each shape separately.

Resizing

CSS2.1 provides a mechanism for controlling the appearance of a scrolling mechanism (e.g. scrollbars) on block container elements. This specification adds a mechanism to that for controlling user resizability of elements as well as the ability to specify text overflow behavior.

Resizing Boxes: the 'resize' property

The 'resize' property allows the author to specify whether or not an element is resizable by the user, and if so, along which axis/axes.
	Name: resize
	Value: none | both | horizontal | vertical | block | inline
	Initial: none
	Applies to: elements that are scroll containers
	 and optionally replaced elements such as images, videos, and iframes
	Inherited: no
	Percentages: N/A
	Computed value: specified keyword
	Animation type: discrete
	
none
The UA does not present a resizing mechanism on the element, and the user is given no direct manipulation mechanism to resize the element.
both
The UA presents a bidirectional resizing mechanism to allow the user to adjust both the height and the width of the element.
horizontal
The UA presents a unidirectional horizontal resizing mechanism to allow the user to adjust only the width of the element.
vertical
The UA presents a unidirectional vertical resizing mechanism to allow the user to adjust only the height of the element.
block
The UA presents a unidirectional [=block-axis=] resizing mechanism to allow the user to adjust only the [=block size=] of the element.
inline
The UA presents a unidirectional [=inline-axis=] resizing mechanism to allow the user to adjust only the [=inline size=] of the element.
Currently it is possible to control the appearance of the scrolling mechanism (if any) on an element using the 'overflow' property (e.g. overflow: scroll vs. overflow: hidden etc.). The purpose of the 'resize' property is to allow control over the appearance and function of the resizing mechanism (e.g. a resize box or widget) on the element. Note: The resizing mechanism is NOT the same as the scrolling mechanism, nor is it related to any UA mechanism for zooming. The scrolling mechanism allows the user to determine which portion of the contents of an element is shown. The resizing mechanism allows the user to determine the size of the element. The 'resize' property applies to elements that are scroll containers. UAs may also apply it, regardless of the value of the 'overflow' property, to:
  • Replaced elements representing images or videos, such as <{img}>, <{video}>, <{picture}>, <{svg}>, <{object}>, or <{canvas}>.
  • The <{iframe}> element.
The effect of the 'resize' property on generated content is undefined. Implementations should not apply the 'resize' property to generated content. Note: the 'resize' property may apply to generated content in the future if there is implementation of Interface CSSPseudoElement. When an element is resized by the user, the user agent sets the 'width' and 'height' properties to px unit length values of the size indicated by the user, in the element’s style attribute DOM, replacing existing property declaration(s), if any, without ''!important'', if any. If an element is resized in only one dimension, only the corresponding property is set, not both. The precise direction of resizing (i.e. altering the top-left of the element or altering the bottom-right) may depend on a number of CSS layout factors including whether the element is absolutely positioned, whether it is positioned using the 'right' and 'bottom' properties, whether the language of the element is right-to-left etc. The UA should consider the direction of resizing (as determined by CSS layout), as well as platform conventions and constraints when deciding how to convey the resizing mechanism to the user. The user agent must allow the user to resize the element with no other constraints than what is imposed by 'min-width', 'max-width', 'min-height', and 'max-height'. Note: There may be situations in which user attempts to resize an element appear to be overridden or ignored, e.g. because of ''!important'' cascading declarations that supersede that element’s style attribute 'width' and 'height' properties in the DOM. Changes to the computed value of an element's 'resize' property do not reset changes to the style attribute made due to user resizing of that element.
For example, to make iframes scrollable and resizable, the following rule can be used:

		iframe,object[type^="text/"],
		object[type$="+xml"],object[type="application/xml"]
		{
		  overflow:auto;
		  resize:both;
		}
		

Pointing Devices and Keyboards

Pointer interaction

Styling the Cursor: the 'cursor' property

	Name: cursor
	Value: [ [ <> | <> ] [<x> <y>]? ]#? 
[ auto | default | none |
context-menu | help | pointer | progress | wait |
cell | crosshair | text | vertical-text |
alias | copy | move | no-drop | not-allowed | grab | grabbing |
e-resize | n-resize | ne-resize | nw-resize | s-resize | se-resize | sw-resize | w-resize | ew-resize | ns-resize | nesw-resize | nwse-resize | col-resize | row-resize | all-scroll |
zoom-in | zoom-out
] Initial: auto Applies to: all elements Inherited: yes Percentages: N/A Computed value: as specified, except with any relative URLs converted to absolute Animation type: discrete
This property specifies the type of cursor to be displayed for the pointing device when the cursor's hotspot is within the element's border edge. Note: As per [[css-backgrounds-3#border-radius]], the border edge is affected by 'border-radius'. In the case of overlapping elements, which element determines the type of cursor is based on hit testing: the element determining the cursor is the one that would receive a click initiated from this position. Note: The specifics of hit testing are out of scope of this specification. Hit testing will hopefully be defined in a future revision of CSS or HTML. User agents may ignore the cursor property over native user agent controls such as scrollbars, resizers, or other native UI widgets e.g. those that may be used inside some user agent specific implementations of form elements. User agents may also ignore the 'cursor' property and display a cursor of their choice to indicate various states of the UA's user interface, such as a busy cursor when the page is not responding, or a text cursor when the user is performing text selection. Note: [[HTML]] defines special handling of image maps for the 'cursor' property. Values have the following meanings:
image cursors
The first (optional) component of the 'cursor' property is a list of image-based cursors. If the user agent cannot handle the first cursor of a list of cursors, it must attempt to handle the second, etc. If the user agent cannot handle any of these author-defined cursors, it must use the keyword-based cursor at the end of the list. Each author-defined image-based cursor is defined by the following values:
<> | <>
The user agent retrieves the cursor from the resource designated by the <> or <>. Conforming user agents may, instead of <> and <>, support <> which is a superset. <url-set> is a limited version of ''image-set()'', where the <> sub-production is restricted to <> only. The UA must support the following image file formats:
  • PNG, as defined in [[!PNG]]
  • SVG, as defined in [[!SVG11]], in secure static mode [[!SVG2]], if it has a [=natural size=].
  • any other non-animated image file format that they support for <> in other properties, such as the 'background-image' property
In addition, the UA should support the following image file formats:
  • SVG, as defined in [[!SVG11]], in secure animated mode [[!SVG2]], if it has a [=natural size=].
  • any other animated image file format that they support for <> in other properties, such as the 'background-image' property
The UA may also support additional file formats, including SVG, as defined in [[!SVG11]], in secure static mode or secure animated mode [[!SVG2]], even if it does not have a [=natural size=]. Note: The CSS Working Group initially intended support for all SVG, naturally sized or not. Support for non-naturally sized SVG was downgraded from mandatory to optional due to lack of implementations. Note: For a number of years, the only file formats supported for cursors in common desktop browsers were the .ico and .cur file formats, as designed by Microsoft. Although this is no longer the case (PNG and SVG have broad support), for compatibility with legacy content, UAs are encouraged to support these, even though the lack of an open specification makes it impossible to have a normative requirement about these formats. Some information on these formats can be found on Wikipedia. The default object size for cursor images is a UA-defined size that should be based on the size of a typical cursor on the UA's operating system. The concrete object size is determined using the default sizing algorithm. If an operating system is incapable of rendering a cursor above a given size, cursors larger than that size must be shrunk to within the OS-supported size bounds, while maintaining the cursor image's [=natural aspect ratio=], if any. The optional <x> and <y> coordinates identify the exact position within the image which is the pointer position (i.e., the hotspot).
<x>
<y>
Each is a <>. The x-coordinate and y-coordinate of the position in the cursor's coordinate system (left/top relative) which represents the precise position that is being pointed to. Note: This specification does not define how the coordinate systems of the various types of <> are established, and defers these definitions to [[CSS-IMAGES-4]]. If the values are unspecified, then the natural hotspot defined inside the image resource itself is used. If both the values are unspecific and the referenced cursor has no defined hotspot, the effect is as if a value of "0 0" was specified. If the coordinates of the hotspot, as specified either inside the image resource or by <x> and <y> values, fall outside of the cursor image, they must be clamped (independently) to fit.
general purpose cursors
auto
The UA determines the cursor to display based on the current context. Specifically, ''cursor/auto'' behaves as ''cursor/text'' over selectable text or editable elements, and ''cursor/default'' otherwise. Note: When over selectable text or editable elements, as it does with ''cursor/text'', the UA must use a vertical or horizontal text cursor, as appropriate for the [=writing mode=] of the element, and may take transforms and other visual effects into account as well.
default
The platform-dependent default cursor. Often rendered as an arrow.
none
No cursor is rendered for the element.
links and status cursors
context-menu
A context menu is available for the object under the cursor. Often rendered as an arrow with a small menu-like graphic next to it.
help
Help is available for the object under the cursor. Often rendered as a question mark or a balloon.
pointer
The cursor is a pointer that indicates a link. Often rendered as the backside of a hand with the index finger extended. Unless otherwise specified, UAs must apply ''cursor: pointer'' to hyperlinks for all supported document formats via the UA stylesheet, using a normal (i.e. not ''!important'') declaration. Authors should use pointer on links and may use on other interactive elements.
progress
A progress indicator. The program is performing some processing, but is different from ''wait'' in that the user may still interact with the program. Often rendered as a spinning beach ball, or an arrow with a watch or hourglass.
wait
Indicates that the program is busy and the user should wait. Often rendered as a watch or hourglass.
selection cursors
cell
Indicates that a cell or set of cells may be selected. Often rendered as a thick plus-sign with a dot in the middle.
crosshair
A simple crosshair (e.g., short line segments resembling a "+" sign). Often used to indicate a two dimensional bitmap selection mode.
text
Indicates text that may be selected. Often rendered as an I-beam. User agents must automatically display a vertical I-beam/cursor over elements with a horizontal [=writing mode=], and a horizontal I-beam/cursor (e.g. same as the ''vertical-text'' keyword) over elements in a vertical [=writing mode=]. Additionally, user agents may take transforms (see [[CSS-TRANSFORMS-1]]) or other visual effects such as text on a path (See [[SVG2/text#TextLayoutPath]]), when choosing between the horizontal or vertical text cursor, and may display any angle of I-beam/cursor for text that is rendered at any particular angle.
vertical-text
Indicates vertical-text that may be selected. Often rendered as a horizontal I-beam.
drag and drop cursors
alias
Indicates an alias of/shortcut to something is to be created. Often rendered as an arrow with a small curved arrow next to it.
copy
Indicates something is to be copied. Often rendered as an arrow with a small plus sign next to it.
move
Indicates something is to be moved.
no-drop
Indicates that the dragged item cannot be dropped at the current cursor location. Often rendered as a hand or pointer with a small circle with a line through it.
not-allowed
Indicates that the requested action will not be carried out. Often rendered as a circle with a line through it.
grab
Indicates that something can be grabbed (dragged to be moved). Often rendered as the backside of an open hand.
grabbing
Indicates that something is being grabbed (dragged to be moved). Often rendered as the backside of a hand with fingers closed mostly out of view.
resizing and scrolling cursors
e-resize, n-resize, ne-resize, nw-resize, s-resize, se-resize, sw-resize, w-resize
Indicates that some edge is to be moved. For example, the ''se-resize'' cursor is used when the movement starts from the south-east corner of the box.
ew-resize, ns-resize, nesw-resize, nwse-resize
Indicates a bidirectional resize cursor.
col-resize
Indicates that the item/column can be resized horizontally. Often rendered as arrows pointing left and right with a vertical bar separating them.
row-resize
Indicates that the item/row can be resized vertically. Often rendered as arrows pointing up and down with a horizontal bar separating them.
all-scroll
Indicates that the something can be scrolled in any direction. Often rendered as arrows pointing up, down, left, and right with a dot in the middle.
zooming cursors
zoom-in, zoom-out
Indicates that something can be zoomed (magnified) in or out, and often rendered as a magnifying glass with a "+" or "-" in the center of the glass, for ''zoom-in'' and ''zoom-out'' respectively.
Here is an example of using several cursor values.

		:link,:visited {
			cursor: url(example.svg),
				url(hyper.cur),
				url(hyper.png) 2 3,
				pointer
		}
		
This example sets the cursor on all hyperlinks (whether visited or not) to an external SVG image to be used as a cursor. If that fails to load, user agents would simply skip to the next value and attempt to use the "hyper.cur" cursor. If that cursor format was also not supported, the UA could attempt to use the "hyper.png" cursor with the explicit hotspot. Finally if the UA cannot load any of those image cursors, the UA would skip to the last value and render the ''pointer'' cursor.
Cursor of the canvas
The document canvas is the infinite surface over which the document is rendered [[!CSS21]]. Since no element corresponds to the canvas, in order to allow styling of the cursor when not over any element, the canvas cursor re-uses the root element's cursor. However, if no boxes are generated for the root element (for example, if the root element has ''display: none''), then the canvas cursor is the platform-dependent default cursor. Note: An element might be invisible but still generate boxes. For example, if the element has ''visibility: hidden'' but not ''display: none'', boxes are generated for it and its cursor is used for the canvas.

Insertion caret

Coloring the Insertion Caret: the 'caret-color' property

	Name: caret-color
	Value: auto | <>
	Initial: auto
	Applies to: all elements
	Inherited: yes
	Percentages: N/A
	Computed value: The computed value for ''caret-color/auto'' is ''caret-color/auto''.
	 For <> values, see [[!CSS-COLOR-4#resolving-color-values]] in [[!CSS-COLOR-4]].
	Animation Type: by computed value
	
auto
User agents should use ''currentColor''. User agents may automatically adjust the color of caret to ensure good visibility and contrast with the surrounding content, possibly based on the currentColor, background, shadows, etc. Note: When 'caret-shape' is ''caret-shape/block'', ensuring good visibility and contrast is best achieved with a UA determined color other than ''currentColor''.
<>
The insertion caret is colored with the specified color.
The caret is a visible indicator of the insertion point in an element where text (and potentially other content) is inserted by the user. This property controls the color of that visible indicator. Note: UAs might have additional things that count as “carets”. For example, some UAs can show a “navigation caret”, which acts similarly to an insertion caret but can be moved around in non-editable text and is functionally a caret. On the other hand, the cursor image shown when hovering over text when the 'cursor' property is ''cursor/auto'', or when hovering over an element where the 'cursor' property is ''cursor/text'' or ''cursor/vertical-text'', though it sometimes resembles a caret, is not a caret (it's a cursor).
Example: a textarea with caret-color:#00aacc;

Animation of the insertion caret: 'caret-animation'

	Name: caret-animation
	Value: auto | manual
	Initial: auto
	Applies to: elements that accept input
	Inherited: yes
	Percentages: N/A
	Computed value: specified keyword
	Animation type: discrete
	
On most platforms and in most UAs, the text insertion caret blinks. This property allows the author to take control over the way the caret is animated.
auto
The UA determines how the caret should be animated, if at all. It should match platform conventions, and may be adjusted based on context. Note: This is typically rendered as a blinking caret. Fading in and out instead of blinking is a variant that appears in some environments.
manual
The UA must not animate the caret. Note: This is only about UA driven animations of the caret. When CSS animations are used to animate the caret color, they apply normally.
The UA determines the speed at which the cursor animates (blinks, fades…). It should follow platform conventions and settings. Note: It is recommended for authors to stop the caret from blinking or fading using ''caret-animation: manual'' when applying custom animations using [[CSS3-ANIMATIONS]], to prevent the UA's animation and the CSS animation to interfere. Note: See Guideline 2.3: Seizures: Do not design content in a way that is known to cause seizures [[WCAG20]].
A user who is disturbed by or has adverse reactions to blinking or flashing visuals may want to make all carets static and non-blinking, regardless of platform defaults or author settings. This can be accomplished with the following rule in the user stylesheet.

		/* prevent the caret from blinking/flashing */
		:read-write { caret-animation: manual !important; }

		/* prevent changes of caret-color, including animations */
		:read-write { caret-color: auto !important; }
		
UAs that do not have an editable user stylesheet should provide a setting to disable blinking, flashing and animated carets. UAs that do have an editable user stylesheet may want to provide this setting as well. See [[WCAG]] Guideline 2.2 and Guideline 2.3 for details.
Typically, the caret blinks between on and off. This makes it alternate between 2 colors.

		textarea {
			caret-animation: manual;
			caret-color: blue;
			animation: caret-alternate 2s step-end infinite;
		}
		@keyframes caret-alternate {
			50% { caret-color: red; }
		}
		
The simulated rendering below illustrates how this should look.
Text area with color-alternating caret
Focus the element below to see how your browser renders it.
Text area with color-alternating caret
If a user agent is unwilling to yield control of caret animmations to page authors and would not honor ''caret-animation: manual'', it must not implement the property at all. Note: This enables authors to use @supports (caret-animation: manual) { … } to gate code that would depend on this functionality. See [[CSS-CONDITIONAL-3]].

Shape of the insertion caret: 'caret-shape'

	Name: caret-shape
	Value: auto | bar | block | underscore
	Initial: auto
	Applies to: elements that accept input
	Inherited: yes
	Percentages: N/A
	Computed value: specified keyword
	Animation type: by computed value
	
This property allows authors to specify the desired shape of the text insertion caret. Within the context of this definition, character is to be understood as extended grapheme cluster, as defined in [[!UAX29]], and visible character means a character with a non-zero advance measure.
auto
The UA determines the shape of the caret. It should match platform conventions, and may be adjusted based on context. For example, if a UA switches between insert mode and overtype mode when the user presses the insert key on their keyboard, it may show a ''caret-shape/bar'' caret in insert mode, and a ''caret-shape/block'' caret in overtype mode.
bar
The UA must render the text insertion caret as a thin bar placed at the insertion point. This means it is between, before, or after characters, not over them. It should be perpendicular to the inline progression direction, although UAs may render it slanted when inserting italic or oblique text.
block
The UA must render the text insertion caret as a rectangle overlapping the next visible character following the insertion point. If there is no visible character after the insertion point, the UA must render the caret after the last visible character. UAs may render it as a slanted rectangle when inserting italic or oblique text.
underscore
The UA must render the text insertion caret as a thin line under (as defined in [[!CSS-WRITING-MODES-3]] the next visible character following the insertion point. If there is no visible character after the insertion point, the UA must render the caret after the last visible character.
The width of the ''caret-shape/block'' and ''caret-shape/underscore'' carets should be the advance measure of the next visible character after the insertion point, or ''1ch'' if there is no next visible character or if this information is impractical to determine. When determining the orientation and appearance of the caret, UAs must take into account the writing mode [[!CSS-WRITING-MODES-3]] and must apply transformations [[!CSS-TRANSFORMS-1]]. If the edited text is laid out on a path, for instance by using the SVG <{textPath}> element, UAs should also account for this. The thickness of ''caret-shape/bar'' and ''caret-shape/underscore'' carets-- as well as that of ''caret-shape/auto'' carets with a similar rendering-- is determined by the user agent. When practical, the user agent should choose a thickness that ensures the caret remains visible even if it has been scaled down via means such as transformations [[CSS-TRANSFORMS-1]]. The stacking position of the caret is left undefined within the following constraints:
  • The caret must not be obscured by the background of the element.
  • UAs must render ''caret-shape/block'' carets so that the character it overlaps with is not obscured by the caret.
This illustrates the typical appearance of the various caret shapes. In each of the sample renderings below, the insertion point is between the letters u and m.
'caret-shape' Sample rendering Your browser
(focus each cell to see the caret)
''bar'' Lorem ipsum Lorem Ipsum
''caret-shape/block'' Lorem ipsum Lorem Ipsum
''underscore'' Lorem ispum Lorem Ipsum
''caret-shape/underscore'' or ''caret-shape/block'' carets are commonly used in terminals and command lines, as in this example.

		.console {
			caret-shape: underscore;
			background: black;
			color: white;
			font-family: monospace;
			padding: 1ex;
		}
		
The simulated rendering below illustrates how this should look.
		user@host:css-ui-4 $ ls -a
		. .. Overview.bs Overview.html
		user@host:css-ui-4 $  
		
Focus the element below to see how your browser renders it.
		user@host:css-ui-4 $ ls -a
		. .. Overview.bs Overview.html
		user@host:css-ui-4 $
		

Insertion caret shorthand: 'caret'

	Name: caret
	Value: <<'caret-color'>> || <<'caret-animation'>> || <<'caret-shape'>>
	Initial: auto
	Applies to: elements that accept input
	Inherited: yes
	Percentages: N/A
	
This property is a shorthand for setting 'caret-color' and 'caret-shape' in one declaration. Omitted values are set to their initial values.
This example illustrates using the various caret related properties in combination. They are used here to simulate the appearance of the caret on an old phosphor computer monitor.

		#old-screen {
			caret: block manual;
			animation: old-caret 2s infinite;
			/*styling of the screen omitted for brevity */
		}
		@keyframes old-caret {
			from, 50% { caret-color: green; }
			75%, to { caret-color: transparent; }
		}
		
The simulated rendering below illustrates how this should look.
>  
Focus the element below to see how your browser renders it.
>

Keyboard control

	Name: nav-up , nav-right , nav-down , nav-left
	Value: auto | <> [ current | root | <> ]?
	Initial: auto
	Applies to: all enabled elements
	Inherited: no
	Percentages: N/A
	Computed value: as specified
	Animation type: discrete
	
auto
The user agent automatically determines which element to navigate the focus to in response to directional navigational input.
<>
The <> value is an ID selector [[SELECT]]. In response to directional navigation input corresponding to the property, the focus is navigated to the first element in tree order matching the selector. If this refers to the currently focused element, the directional navigation input respective to the nav- property is ignored — there is no need to refocus the same element. If no element matches the selector, the user agent automatically determines which element to navigate the focus to. If the focus is navigated to an element that was not otherwise focusable, it becomes focusable only as the result of this directional navigation, and the '':focus'' pseudo-class matches the element while it is focused as such. Note: there were other options under consideration for such "not otherwise focusable" elements, including focus to the next otherwise focusable element in the document tree (including descendants of such a not otherwise focusable element). Input on such other options is welcome and explicitly solicited, especially from implementation experiences and author experience using the directional navigation properties in their content.
<>
The <target-name> parameter indicates the target frame for the focus navigation. It is a <> and it MUST NOT start with the underscore "_" character. Error handling: if it does start with an underscore, "_parent" navigates to the parent frame, "_root" is treated as ''root'', and other values navigate to a frame by that name if it exists. If the specified target frame does not exist, the parameter will be treated as the keyword ''current'', which means to simply use the frame that the element is in. The keyword ''root'' indicates that the user agent should target the full window.
User agents for devices with directional navigation keys respond by navigating the focus according to four respective nav-* directional navigation properties (nav-up, nav-right, nav-down, nav-left). This specification does not define which keys of a device are directional navigational keys. Note: Typical personal computers have keyboards with four arrow keys. One possible implementation would be to use those four arrow keys for directional navigation. For accessibility and user convenience, user agents should allow configuration of which keys on a keyboard are used for directional navigation.
Example: positioned buttons
Here is an example of buttons positioned in a diamond shape whose directional focus navigation is set in such a way to navigate the focus clockwise (or counter-clockwise) around the diamond shape when the user chooses to navigate directionally.

		button { position:absolute }

		button#b1 {
			top:0; left:50%;
			nav-right:#b2; nav-left:#b4;
			nav-down:#b2; nav-up:#b4;
		}

		button#b2 {
			top:50%; left:100%;
			nav-right:#b3; nav-left:#b1;
			nav-down:#b3; nav-up:#b1;
		}

		button#b3 {
			top:100%; left:50%;
			nav-right:#b4; nav-left:#b2;
			nav-down:#b4; nav-up:#b2;
		}

		button#b4 {
			top:50%; left:0;
			nav-right:#b1; nav-left:#b3;
			nav-down:#b1; nav-up:#b3;
		}
		
Whatever markup sequence the buttons may have (which is not specified in this example) is irrelevant in this case because they are positioned, and yet, it is still important to ensure focus navigation behaviors which relate reasonably to the specified layout.
Example: moving focus to inside a frame
Moving the focus to an element in a specific frame requires both the element's id and the frame's name. This example shows how to make navigating left from the button with id "foo" move the focus to the element with id "bar" within the frame named "sidebar".

		button#foo { nav-left: #bar "sidebar"; }
		

Obsolete: the ime-mode property

''ime-mode'' is a property somewhat implemented in some browsers, that is problematic and officially obsoleted by this specification and its predecessor [[CSS-UI-3]]. There is documentation of non-interoperability of these implementations. User agents should not support the ime-mode property. Authors must not use the ime-mode property. Users may use the ime-mode property only for repair use-cases where they have to work around bad sites and legacy implementations, e.g. with a user style sheet rule like:
Example: user preference
input[type=password] {
			ime-mode: auto !important;
		}
		
This example CSS may be placed into a user style sheet file to force password input fields to behave in a default manner. This specification deliberately does not attempt to document the functionality of legacy ime-mode implementations nor what they specifically support because it does not make sense to pursue or recommend any such path.
Note: there are several [[HTML5]] features which authors should use to provide information to user agents that allow them to provide a better input user experience:
  • The global lang attribute
  • The inputmode, pattern, and type attributes of the input element

User Interaction

Controlling content selection

The 'user-select' property enables authors to specify which elements in the document can be selected by the user and how. This allows for easier interactions when not all elements are equally useful to select, avoiding accidental selections of neighboring content.
	Name: user-select
	Value: auto | text | none | contain | all
	Initial: auto
	Inherited: no
	Applies to: all elements, and optionally to the ''::before'' and ''::after'' pseudo-elements
	Computed value: specified keyword
	Animation type: discrete
	
User agents must not apply the 'user-select' property to the ''::first-line'' and ''::first-letter'' pseudo-elements. Note: The UA may apply this property to the ''::before'' and ''::after'' pseudo-elements. If it does, the ''user-select/auto'' value maps to a [=used value=] of ''user-select/none'' on these pseudos, but other values can be specified. This preserves the legacy behavior of generated content not being selectable or copyable, which is appropriate when these pseudos are used for decorative purposes. However, this property allows them to become selectable and copyable, as the user would expect in cases where they are used to generate parts of the content, such as the issue numbers in this document. To the extent possible, authors should avoid using generated content for non-decorative purposes, and should prefer including all the content in the DOM. This feature is at risk. Issue: if we allow user-select to change to a value other than ''user-select/none'', we need to figure out what this means for copyability, and DOM APIs. When generated content in pseudo-elements becomes selectable through this mechanism, UAs should also make this content findable through their search function. Issue: Should it also apply to ''::marker''? To page-margin boxes? Should the [=used value=] of '''user-select/auto'' also be ''user-select/none'', or would ''user-select/text'' be more appropriate? The [=used value=] is the same as the [=computed value=], except:
  1. on editable elements where the [=used value=] is always ''user-select/contain'' regardless of the [=computed value=]
  2. when the [=computed value=] is ''user-select/auto'', in which case the [=used value=] one of the other values as defined below
For the purpose of this specification, an editable element is either an editing host or a mutable form control with textual content, such as <{textarea}>. Issue: Should there be constraints on what happens to the used value on elements that are editable descendants of editing hosts? The semantics are not obvious. Maybe ''user-select/none'' should map to ''user-select/text'', or maybe all values should map to ''user-select/text''.
auto
The [=used value=] of ''user-select/auto'' is determined as follows:
  • On the ''::before'' and ''::after'' pseudo-elements, the used value is ''user-select/none''
  • If the element is an editable element, the [=used value=] is ''user-select/contain''
  • Otherwise, if the [=used value=] of 'user-select' on the parent of this element is ''all'', the [=used value=] is ''all''
  • Otherwise, if the [=used value=] of 'user-select' on the parent of this element is ''user-select/none'', the [=used value=] is ''user-select/none''
  • Otherwise, the [=used value=] is ''user-select/text''
Note: This unusual combination of a non-inherited property with an initial value of ''user-select/auto'' whose used value depends on the parent element makes it possible to create what is effectively selective inheritance. This was initially proposed by Microsoft in IE to introduce a behavior similar to inheritance except that the ''user-select/contain'' value does not inherit.
text
The element imposes no constraint on the selection.
none
The UA must not allow selections to be started in this element. A selection started outside of this element must not end in this element. If the user attempts to create such a selection, the UA must instead end the selection range at the element boundary. Note: As of the time of writing, experimental implementations do not all behave like this. Firefox does. Chrome and Safari almost do: for a selection started after the element and trying to go backwards into the element they behave as specified here, but for a selection started before the element and trying to go into the element they behave as if the element has ''all'' and select it entirely. IE does not restrict selections started outside of the element from going into it at all. Another difference is that in Chrome and Safari, if the user attempts to start a selection inside a ''user-select: none'', and to end the selection out of it, a selection will be created from the boundary of the element to the user-designated end-point. Firefox and Internet explorer behave as prescribed in this specification and do not create a selection at all. However, if this element has descendants on which the [=used value=] of 'user-select' is not ''user-select/none'', selections that start and end within these descendants are allowed. The UA must allow selections to extend across this element, and must exclude this element from such a selection. An exception is made for UAs which do not support multiple ranges per selection, and they may include this element. If the element has descendants on which the [=used value=] of 'user-select' is not ''user-select/none'', these descendants must be included in a selection extending across the element. This specification makes no normative requirement about the behavior of the clipboard. however, UAs are encouraged to keep the visual selection consistent with what would get copied to the clipboard when copying. Copying text that does not appear to be selected, or vice versa, is highly confusing to users. Attempting to start a selection in an element where 'user-select' is ''user-select/none'', such as by clicking in it or starting a drag in it, must not cause a pre-existing selection to become unselected or to be affected in any way. As 'user-select' is a UI convenience mechanism, not a copy protection mechanism, the UA may provide an alternative way for the user to explicitly select the text even when 'user-select' is ''user-select/none''. Note: ''user-select/none'' is not a copy protection mechanism, and using it as such is ineffective: user agents are allowed to provide ways to bypass it, it will have no effect on legacy user agents that do not support it, and the user can disable it through the user style sheet or equivalent mechanisms on UAs that do anyway. Instead, ''user-select/none'' is meant to make it easier for the user to select the content they want, by letting the author disable selection on UI elements that are not useful to select. Tools such as CSS validators, linters or in-browser developer tools are encouraged to use heuristics to detect and warn against incorrect or abusive usage that would hamper usability or violate common user expectations.
Authors should be careful about not constraining the user unnecessarily. For example, setting ''user-select: none'' on the root element, and relaxing that restriction on a handful of elements the author judges useful to select can be frustrating to users: * Clicking in empty areas to undo the current selection will no longer be effective * The author may have overlooked some areas which should be selectable * Areas may be added later to the page without remembering to make them selectable * The user may want to select pieces of text other than the main content, for instance to look them up in a dictionary or in some translation tool, or to look for warnings and error messages in a search engine… Instead, a good practice is for authors is to selectively apply ''user-select: none'' to elements which seem likely to be accidentally selected when doing so would interfere with the more likely intended action. Accidentally leaving parts of the page that are unlikely to be interacted with selectable will likely cause much less frustration to users than the opposite.
contain
UAs must not allow a selection which is started in this element to be extended outside of this element. A selection started outside of this element must not end in this element. If the user attempts to create such a selection, the UA must instead end the selection range at the element boundary. The UA must allow selections to extend across this element, and such selections must include the content of the element. Note: At the time of writing, experimental implementations behave differently from each other about selections started outside and selections going into the element. The behavior can be observed even on browsers that do not explicitly support ''user-select/contain'' by trying to select into a <{textarea}> or a contenteditable element. Note: This was initially introduced as an experimental feature in Internet Explorer, under the name user-select: element.
all
The content of the element must be selected atomically: If a selection would contain part of the element, then the selection must contain the entire element including all its descendants. If the element is selected and the [=used value=] of 'user-select' on its parent is ''all'', then the parent must be included in the selection, recursively. If this element has descendants on which the [=used value=] of 'user-select' is not ''all'' and if a selection is entirely contained in these descendants, then the selection is not extended to include this whole element.
Note: Selections can include more than just text and extend over images, tables, videos, etc. The behavior when copying and pasting a such selections is out of scope for this specification. The following additions are made to the UA stylesheet for HTML:

	button, meter, progress, select { user-select: none; }
	
Issue: the list above is incomplete and needs to include at least the various button-like variants of <{input}>. For compatibility with legacy content, UAs that support 'user-select' must also support -webkit-user-select as an alias. Note: The details of the aliasing mechanism is intentionally left up to the UA. Making ''-webkit-user-select'' a shorthand property of 'user-select' is known to be an effective approach, and new implementers should consider it. However, UAs supporting ''-webkit-user-select'' as an alias of 'user-select' through other means exist, without adverse consequences to compatibility, so this specification allows flexibility.

Exclusion from Hit-testing: the 'pointer-events' property

Issue: While this property modifies the normal behavior of hit-testing, this normal hit-testing is currently not specified. There is broad interoperability about the seemingly obvious parts of this problem, but there are countless nuances and corner cases that would greatly benefit from a detailed specification. The CSS-WG would hugely appreciate help with writing such a specification.
	Name: pointer-events
	Value: auto | none
	Initial: ''pointer-events/auto''
	Applies to: all elements
	Inherited: yes
	Percentages: N/A
	Computed value: specified keyword
	Canonical order: per grammar
	Animation type: by computed value type
	
The 'pointer-events' property defines whether an element's boxes can be targeted by point pointer events. Values have the following meanings:
auto
[=Hit-testing=] occurs normally.
none
[=Hit-testing=] acts as if the boxes generated by the element (see [[CSS-DISPLAY-3]]) were not there, effectively causing the element behind the ''pointer-events: none'' element to become the target of [=hit-testing=] based events instead. Issue: The statement above needs to be be qualified; for some purposes, hit-testing continues to take the element into account. For instance, clicking and dragging to start a text selection will continue to work as usual. What is the precise set of things for which hit-testing is affected by 'pointer-events'?
''pointer-events: none'' does not inhibit [[HTML#sequential-focus-navigation|sequential focus navigation]]. Note: This ''pointer-events: none'' only excludes the element itself from [=hit-testing=], not the whole subtree. While this property propagates to descendants via inheritance, ''pointer-events: auto'' can be specified on a descendant of a ''pointer-events: none'' element, and such an element will participate normally in [=hit-testing=]. Note: Events that target a ''pointer-events: auto'' descendant of a ''pointer-events: none'' element can still be caught by event handlers on ''pointer-events: none'' ancestors of the targeted element during the bubbling or capturing phases (see [[DOM#events]]). Note: [[SVG2#PointerEventsProp]] defines a variant of this property for SVG elements, with more possible values. The effect of such values outside of SVG is currently not defined.

Styling Widgets

Widget Accent Colors: the 'accent-color' property

	Name: accent-color
	Value: auto | <>
	Initial: ''accent-color/auto''
	Applies to: all elements
	Inherited: yes
	Percentages: N/A
	Computed value: the keyword ''accent-color/auto'' or a computed color
	Canonical order: per grammar
	Animation type: by computed value type
	
User interface controls on any given platform are typically designed as a cohesive set, under a single, cohesive visual style. On many platforms (though not all), the visual style includes the use of an accent color, a typically bright color that contrasts markedly with the more utilitarian background and foreground colors. Not every control uses the [=accent color=] in every state, but it is nonetheless a core part of the controls’ color scheme. The 'accent-color' CSS property allows the author to specify the [=accent color=] for user-interface controls generated by the element. Values have the following meanings:
auto
Represents a UA-chosen color, which should match the [=accent color=] of the platform, if any.
<>
Specifies the color to be used as the [=accent color=].
The UA should use the specified 'accent-color' to draw whichever parts of the element’s control(s) would have otherwise been styled with an [=accent color=]. The UA must maintain contrast for legibility of the control, and in order to do so may adjust the luminance or brightness of the color or make color substitutions in other parts of the control (e.g. switching an overlaid glyph from using 'color' to using 'background-color'). It may also generate variations of the color for gradients etc. to match the control to platform conventions for the use of the accent color.
A radio button is typically composed of a circle, potentially overlaid by a “dot” representing the checked state. Certain visual styles use an [=accent color=] for the checked state: some of these use it for the background of the circle, others for its foreground. In both cases, the 'accent-color' property styles the affected parts of the control. For visual styles that do not use an [=accent color=] for radio buttons, 'accent-color' will have no effect. The following are all examples of radio buttons conformantly rendered with a blue 'accent-color':
Platform Sample Notes
Firefox 79 / Win Unchecked: white-filled black-stroked circle. Checked: white-filled black-stroked circle with a filled black circle inside. No use of [=accent color=].
Chrome 81 / Win Unchecked: light gray shaded circular bubble. Checked: light gray shaded circular bubble overlaid with a dark grey circle. No use of [=accent color=].
Safari / Snow Leopard Unchecked: uncolored 3D-looking glassy bubble. Checked: light blue 3D-looking glassy bubble overlaid with a small black dot. Accent color used to generate checked-state “background” gradient.
Safari 13 / Mac / Light Unchecked: light gray inset-shadowed circle. Checked: bright blue filled circle overlaid with a small, drop-shadowed white dot. Accent color as checked-state “foreground”.
Safari 13 / Mac / Dark Unchecked: dark gray circle shaded to look embossed but with a convex surface. Checked: bright blue filled circle shaded to look embossed, overlaid with a small white dot. Accent color as checked-state “foreground”.
Chrome 83 / Win / Light Unchecked: dark gray empty circle. Checked: bright blue stroked circle overlaid with concentric bright blue filled circle. Accent color as checked-state “foreground”.
Chrome 83 / Win / Dark Unchecked: light gray circle filled with dark gray. Checked: bright powder-blue stroked circle overlaid with concentric powder-blue filled circle. Accent color as checked-state “foreground”, contrast-adjusted for dark mode backgrounds.

Switching appearance: the 'appearance' property

	Name: appearance
	Value: ''appearance/none'' | ''auto'' | <> | <>
	Initial: none
	Applies To: all elements
	Inherited: no
	Computed value: specified keyword
	Animation type: discrete
	
While the way most elements in a document look can be fully controlled by CSS, widgets are typically rendered by UAs using native UI controls of the host operating system, which can neither be replicated nor styled using CSS. The term widget in this specification denotes elements that can have native appearance, meaning that they are rendered like analogous native widgets or controls of the host operating system or platform, or with a look and feel not otherwise expressible in CSS. It is up to the host language (e.g., HTML [[HTML]]) to define which elements can have native appearance. This specification introduces the 'appearance' property to provide some control over this behavior. In particular, using ''appearance: none'' allows authors to suppress the native appearance of widgets, giving them a primitive appearance where CSS can be used to restyle them.
Note on the history of this feature This previously existed in prefixed form in most browsers. Before standardization, in addition to ''appearance/none'', the possible values were a very long list of all the ways an element could look; each value being responsible for giving form controls their specific look and feel. This list was different across browsers. The CSS Working Group concluded this was impractical to standardize, in part because many values applied to pseudo-elements that other browsers don't have, as they construct form elements differently, and which should not be standardized, since the ability to make form controls look substantially different on different platforms should be preserved. Also, the ability to turn any arbitrary element (including any form control) into any (other) arbitrary form control is considered a misfeature. Instead, the design being specified is based on just having an "auto" value that makes form controls look like whatever they need, and a "none" value that suppresses [=native appearance=]. However, there is evidence that this alone is not web compatible, due in part to uses such as:

		input { appearance: none; }
		input[type=checkbox] { appearance: checkbox; }
		
The design specified here is a compromise between the two, preserving the simplicity of the ''none | auto'' model while maintaining compatibility with existing content via a few additional keywords. The precise list of keywords needed for compatibility and their exact behavior is likely to be refined in a future version of this specification to better handle compatibility with existing content. The CSS-WG welcomes relevant feedback.
none
The element is rendered following the usual rules of CSS. Replaced elements other than widgets are not affected by this and remain replaced elements. Widgets must not have their native appearance, and instead must have their primitive appearance. See [[#appearance-decorative]] and [[#appearance-semantics]] for details.
auto
Elements representing widgets should have the native appearance of that widget, if the properties that disable native appearance for widgets are not in effect. See [[#appearance-disabling-properties]]. The host language is responsible for defining which elements represent which widgets. Elements other than widgets must be rendered as for ''appearance/none''.
<compat-auto>
These values exist for compatibility of content developed for earlier non-standard versions of this property. They all have the same effect as ''appearance/auto''.
<> =  searchfield | textarea | checkbox | radio | menulist | listbox | meter | progress-bar | button 
Issue: When ''appearance/auto'' is widely supported, recommend using it instead. Issue: If any of these values are not needed for web compat, they should be dropped from this list; conversely, any value needed for compat not included in this list should be added. Issue: It is possible that for compat reasons some of these values need to be promoted to being full blown values with effects on arbitrary elements, or that some of these values need to have some side effects on some widgets.
<compat-special>
These values exist for compatibility of content developed for earlier non-standard versions of this property. For the purpose of this specification, they all have the same effect as ''appearance/auto''. However, the host language may also take these values into account when defining the native appearance of the element.
<> =  textfield | menulist-button 
For instance, in [[HTML]]: * The native appearance of <{input}> elements with a "search" <{input/type}> attribute changes to match the appearance of <{input}> elements with a "text" <{input/type}> attribute when 'appearance' is ''textfield''. * The native appearance of drop-down box <{select}> elements changes to match that of its devolved state when 'appearance' is ''menulist-button''.
The values slider-vertical and sliderthumb-vertical are supported in some user agents to change the orientation of <input type=range> elements. These values are not specified because changing the orientation of this control is better done with a separate mechanism. See issue whatwg/html#4177.
An author wanting to customize the look and feel of check boxes in HTML could use the following:

		input[type=checkbox] {
			all: unset; /* this shorthand includes resetting appearance to none */
			width: 1em;
			height: 1em;
			display: inline-block;
			background: red;
		}
		input[type=checkbox]:checked {
			border-radius: 50%;
			background: green;
		}
		input[type=checkbox]:focus-visible {
			outline: auto;
		}
		
<input type="checkbox"> would be rendered as , while <input type="checkbox" checked> would be rendered as , and activating (for example by clicking) the element would toggle the state as usual.
User agents may [=disregard=] some CSS properties on [=widgets=] rendered with their [=native appearance=] to ensure that the intended appearance is preserved, or because these properties may not be meaningful for the chosen appearance. Disregarding a property means that the user agent treats it as if it didn't [=apply to=] the widget in question. Nevertheless, unless an explicit exception is specified (for compatibility reasons), the user agent must still determine the [=computed value=] of any [=disregarded=] property according to the usual rules. However, the following properties must not be [=disregarded=]:
  • 'appearance'
  • 'display' (the [=inner display type=] may be ignored)
  • 'visibility'
  • 'position'
  • 'top'
  • 'right'
  • 'bottom'
  • 'left'
  • 'float'
  • 'clear'
  • 'margin' and related long-hand properties
  • 'unicode-bidi'
  • 'direction'
  • 'cursor'
  • 'z-index'
Issue: Are there more properties that should be included in this list? Should we remove some? Should we whitelist the properties that are ok to ignore instead of blacklisting those that are not? Either way, UAs do ignore some properties when rendering widgets, so this specification needs to say something about this. For compatibility with legacy content, UAs must also support -webkit-appearance as a [=legacy name alias=] of 'appearance'.

Properties Disabling Native Appearance

Certain properties, when declared in the [=Author Origin=], will disable the [=native appearance=] of certain [=widgets=]. Specifically, if all the declarations of the [=Author Origin=] pertaining to such a [=widget=] are cascaded and a [=cascaded value=] exists-- after having rolled back any number ''revert'' or ''revert-layer'' values-- for any property that disables native appearance for widgets, then that [=widget=] is rendered as a devolved widget. The rendering of a devolved widget is identical to that of the [=widget=] in its [=primitive appearance=], except when specified otherwise by the host language. The host language defines which elements represent devolvable widgets. Widgets whose appearance remains native regardless of any properties that disable native appearance for widgets are called non-devolvable widgets. The properties that disable native appearance for widgets are:
  • 'background-color'
  • 'border-top-color'
  • 'border-top-style'
  • 'border-top-width'
  • 'border-right-color'
  • 'border-right-style'
  • 'border-right-width'
  • 'border-bottom-color'
  • 'border-bottom-style'
  • 'border-bottom-width'
  • 'border-left-color'
  • 'border-left-style'
  • 'border-left-width'
  • 'border-block-start-color'
  • 'border-block-end-color'
  • 'border-inline-start-color'
  • 'border-inline-end-color'
  • 'border-block-start-style'
  • 'border-block-end-style'
  • 'border-inline-start-style'
  • 'border-inline-end-style'
  • 'border-block-start-width'
  • 'border-block-end-width'
  • 'border-inline-start-width'
  • 'border-inline-end-width'
  • 'background-image'
  • 'background-attachment'
  • 'background-position'
  • 'background-clip'
  • 'background-origin'
  • 'background-size'
  • 'border-image-source'
  • 'border-image-slice'
  • 'border-image-width'
  • 'border-image-outset'
  • 'border-image-repeat'
  • 'border-top-left-radius'
  • 'border-top-right-radius'
  • 'border-bottom-right-radius'
  • 'border-bottom-left-radius'
  • 'border-start-start-radius'
  • 'border-start-end-radius'
  • 'border-end-start-radius'
  • 'border-end-end-radius'

Effects of 'appearance' on Decorative Aspects of Elements

All decorative visual aspects of a widget which are not caused by a CSS style rule must be suppressed when the appearance is changed from [=native appearance|native=] to [=primitive appearance|primitive=] using 'appearance', even if the UA's internal representation for this element was composed of multiple elements or pseudo-elements combined together.
For example, the [[HTML]] <{select}> element is often rendered with an arrow on the right side indicating that the list will be expanded if the element is clicked. If the computed value of 'appearance' on a <{select}> element is ''appearance/none'' this must disappear.
UAs should include in their user agent stylesheet style rules to give widgets a recognizable shape when 'appearance' is ''appearance/none''. Note: Authors may therefore need to override these UA style rules to get the styling they intended.
Authors may find it convenient to use ''all: unset'', to get fully unstyled widgets, which they can then style as they want without interference from the user agent's stylesheet. However, this also suppresses the focus indicators provided by the same UA stylesheet. In order to avoid damaging accessibility, authors who do so should restore a focus indicator, for instance by using '':focus-visible { outline: auto; }''.

Effects of 'appearance' on Semantic Aspects of Elements

When showing the [=primitive appearance=] of a [=widget=] or its [=devolved=] state, user agents must preserve aspects of the widget which are necessary to operate the widget with its original semantics. The UA may however give them a different look and feel as long as it remains possible to operate the widget. Aspects of a widget which are merely needed to observe the state the widget is in and are not needed to operate it should be suppressed as well when the same information can be conveyed using ordinary CSS. Document languages should specify for each widget that they define what needs to be preserved.
For example, the slider of an <input type=range> is preserved (or replaced by an equivalent mechanism) even if 'appearance' is ''appearance/none'', as it would otherwise not be possible to change the value of the range with the mouse or touchscreen. On the other hand, the check mark in an <input type=checkbox checked> must be suppressed, as it merely indicates the state the element is in, which can be styled in different ways using the '':checked'' selector.
The behavior and semantics of elements remain defined by the document language, and are not influenced by this property.
For example, regardless of the computed value of 'appearance':
  • Elements which can be in different states keep this ability, and the relevant pseudo-classes match as usual.
  • If a <{select}> element is activated, the UI to choose one of the associated <{option}> elements is shown (although it may look different).
  • Event handlers attached to the element trigger as usual.
Conversely, changing the appearance of an element must not cause it to acquire the semantics, pseudo-classes, event handlers, etc. that are typical of the element whose appearance it acquires.
For example, neither '':enabled'' nor '':disabled'' match on a <{div}> styled with ''appearance: button''. The ability for an element to be focused is also not changed by the 'appearance' property.

Switching form control sizing: the 'field-sizing' property

	Name: field-sizing
	Value: fixed | content
	Initial: ''field-sizing/fixed''
	Applies to: [=elements with default preferred size=]
	Inherited: no
	Percentages: N/A
	Computed Value: as specified
	Canonical order: per grammar
	Animation type: discrete
	
For the purpose of this specification, an element with default preferred size is an element whose [=intrinsic size=] is fixed regardless of the size of its content. The host language defines which elements are applicable to it. For example, in HTML <{textarea}> is an [=element with default preferred size=].
fixed
For [=element with default preferred size=], the UA must apply set the [=intrinsic size=] to the default preferred size defined by the host language for that element. Otherwise UA must behave the same as ''field-sizing/content''.
content
The UA must determine the element's [=intrinsic size=] based on its content, and must ignore any default preferred size defined by the host language for that element. If the element is an [=element with default preferred size=] and is listed in [[CSS-SIZING-3#min-content-zero|compressible replaced elements]], the UA must stop treating the element as a replaced element for [=min-content contribution=].
For instance, <{textarea}> has fixed size regardless of its content by default: The quick brown fox jumps over the lazy dog. If ''field-sizing: content'' is applied, the size of the former should fit to a text caret. If ''field-sizing: content'' is applied and its width property has a fixed value like ''width: 10em'', the element height depends on the number of the content lines: The quick brown fox jumps over the lazy dog.⎸

Obscuring sensitive input: the 'input-security' property

Issue: The CSS-WG has agreed that while be believe that providing this piece of functionality to users is important, doing it via CSS+JS is the wrong approach, and that instead it should be built into user agents: this needs to work consistently from site to site for it to be discoverable and understandable by users, this needs to work even when JS is turned off, this needs to have consistently solid accessibility… We therefore intend to remove this from the specification and instead, we would like to see this behavior specified in the HTML specification as part of the interaction model of password fields. Holding off deleting until the situation with HTML is clarified. See https://github.com/w3c/csswg-drafts/issues/6788 and https://github.com/whatwg/html/issues/7293.
	Name: input-security
	Value: auto | none
	Initial: ''input-security/auto''
	Applies to: [=sensitive text inputs=]
	Inherited: no
	Percentages: N/A
	Computed Value: as specified
	Canonical order: per grammar
	Animation type: by computed value type
	
For the purpose of this specification, a sensitive text input is a text input whose purpose is to accept sensitive input, as defined by the host language. For example, in HTML <{input/type/password|<input type=password>}> is a [=sensitive text input=]. By default, user agents obscure the contents of [=sensitive text inputs=] in order to prevent onlookers from seeing it. Users may wish to temporarily disable this obscuring in order to confirm that they've typed their sensitive information correctly. The ''input-security'' property may be used by authors to enable or disable this obscuring.
none
The UA must not obscure the text in the control, so that it can be read by the user.
auto
The UA should obscure the text in the control, so that it cannot be read by the user.
While the exact mechanism by which user agents obscure the text in the control is undefined, user agents typically obscure [=sensitive text inputs=] by replacing each character with some suitable replacement such as U+002A ASTERISK (*) or U+25CF BLACK CIRCLE (●).
For instance, given this style sheet

		input[type=password] {
			input-security: auto;
		}
and this HTML

		<input type=password value=MySecret794>
		
a user agent might render the <{input/type/password|<input type=password>}> like so: ●●●●●●●●●●●

Control Specific Rules

Issue: Maybe some or all of this section should be moved to the [[HTML]] spec. at some point. Issue: On some elements, setting some properties inhibits ''appearance: auto''. For instance, even if 'appearance' is ''appearance/auto'', buttons lose their native appearance when a 'border' is set. This is not in contradiction with the definition of ''appearance/auto'', since ''appearance: auto'' only means UAs may use a native appearance, but for greater interoperability, it would be good to document which properties on which elements have this effect. Issue: Documenting what UAs need to put in their UA stylesheet would be good.

Single-Line Text Input Controls

When 'appearance' is ''appearance/auto'', single-line text input controls such as [[!HTML]] <input type=text> must be rendered so that: * The content is clipped in the inline direction to the content edge * The content is clipped in the block direction to the padding edge * The content is vertically centered * The content does not wrap * The 'text-overflow' property applies regardless of the value of the 'overflow' property

Appendix A. Acknowledgments

This appendix is informative. This specification builds upon [[CSS-UI-3]], which was edited and written for the most part by Tantek Çelik from 1999 to the present, first while representing Microsoft, then as an Invited Expert, and most recently while representing Mozilla. Thanks to feedback and contributions from Rossen Atanassov, Tab Atkins, L. David Baron, Bert Bos, Matthew Brealey, Rick Byers, Ada Chan, James Craig, Michael Cooper, Axel Dahmen, Michael Day, Micah Dubinko, Elika E., Steve Falkenburg, Andrew Fedoniouk, Al Gilman, Ian Hickson, Bjoern Hoehrmann, Alan Hogan, David Hyatt, Richard Ishida, Sho Kuwamoto, Yves Lafon, Stuart Langridge, Susan Lesch, Peter Linss, Kang-Hao Lu, Masayuki Nakano, Mats Palmgren, Brad Pettit, Chris Rebert, François Remy, Andrey Rybka, Simon Sapin, Alexander Savenkov, Sebastian Schnitzenbaumer, Lea Verou, Etan Wexler, David Woolley, Frank Yan, Boris Zbarsky, and Domel.

Appendix B. Changes

This appendix is informative.

Changes from the 16 March 2021 Working Draft

In addition to a number of editorial adjustments, the following normative changes have been made:
  • Introduced a definition for the 'pointer-events' property.
  • Extend the image types required to be supported for the 'cursor' property from just <> to <> and <>. (Support for the broader <> type remains allowed but optional.)
  • Added <> as value for the 'outline-color' property.
  • Retired the invert value of 'outline-color'.
  • Added the ''outline-color/auto'' value of 'outline-color'.
  • Added 'field-sizing' property.
  • Removed claims that 'outline-width' may influence the rendering of ''outline-style: auto'' outlines. (See Issue 9201.)

Changes from the 24 January 2020 Working Draft

In addition to a number of editorial adjustments, the following normative changes have been made:
  • Changed appearance: button to only apply to buttons.
  • Outline-width may be ignored if outline-style is auto.
  • Ensured caret visibility despite transforms.
  • Moved ''resize: block'' and ''resize: inline'' from css-logical-1 to this specification.
  • Introduced the 'accent-color' property.

Changes from the 2 January 2020 Working Draft

In addition to a number of editorial adjustments, the following normative changes have been made:
  • Defined user-select to be discretely animatable, rather than not.
  • Restricted the applicability of ''appearance: button'' so that it can no longer give a buttony appearance to widgets that aren't buttons to start with.
  • Add a clause to preserve visibility of carets even when scaled down via transforms.

Changes from the 22 December 2017 Working Draft

In addition to a number of editorial adjustments, the following normative changes have been made:
  • Added details about form control specific rendering rules
  • Clarify interaction between text-overflow and anonymous block containers
  • Require the ''cursor/pointer'' cursor for hyperlinks in all document formats
  • Moved the 'box-sizing' and 'text-overflow' properties to [[CSS-SIZING-3]] and [[CSS-OVERFLOW-4]] respectively.
  • Changed the requirement that the ''cursor/text'' cursor matches the writing mode from MAY to MUST
  • The definition of the appearance property has been significantly reworked to make the design compatible with existing web content
  • The logic that mapped ''user-select: auto'' to various values at computed value time has been changed to used value time
  • Clarify Author requirements on the ''cursor: pointer'' value

Changes from the 22 Sep 2015 First Public Working Draft

In addition to a number of editorial adjustments, the following normative changes have been made:
  • The caret-animation property have been removed. It may be reintroduced later given sufficient evidence for use cases.
  • The ''resize'' property now also applies to replaced elements representing images or videos, and to iframes.
  • The string values and dual values of the text-overflow property were moved to this specification from level 3.
  • Move directional focus navigation properties from level 3 to level 4
  • Content from the now stable [[CSS-UI-3]] has been merged in.

Appendix C. Considerations for Security and Privacy

This appendix is informative. The W3C TAG is developing a Self-Review Questionnaire: Security and Privacy for editors of specifications to informatively answer. Per the Questions to Consider
Does this specification deal with personally-identifiable information?
No.
Does this specification deal with high-value data?
No.
Does this specification introduce new state for an origin that persists across browsing sessions?
No.
Does this specification expose persistent, cross-origin state to the web?
No.
Does this specification expose any other data to an origin that it doesn’t currently have access to?
No.
Does this specification enable new script execution/loading mechanisms?
Yes to loading, but not to execution. The 'cursor' property accepts <> values which may include URLs to be loaded. These may be SVG documents which may contain scripts, but this specification requires that scripts must not be run.
Does this specification allow an origin access to a user’s location?
No.
Does this specification allow an origin access to sensors on a user’s device?
Yes. The directional focus navigation properties indirectly allow access to the device's keyboard navigation input mechanism such as arrow keys.
Does this specification allow an origin access to aspects of a user’s local computing environment?
No.
Does this specification allow an origin access to other devices?
No.
Does this specification allow an origin some measure of control over a user agent’s native UI?
Yes. The 'cursor' and 'caret' property and sub-properties enable the page to change the display of the cursor and text insertion caret of the user agent’s native UI. In addition the 'outline-style' property’s ''outline-style/auto'' value (and thus 'outline' shorthand) enable the page to potentially display a native focused element outline presentation around any element. The 'appearance' property also allows author to turn off native styling and replace it with css based styling.
Does this specification expose temporary identifiers to the web?
No.
Does this specification distinguish between behavior in first-party and third-party contexts?
No.
How should this specification work in the context of a user agent’s "incognito" mode?
No differently.
Does this specification persist data to a user’s local device?
No.
Does this specification have a "Security Considerations" and "Privacy Considerations" section?
Yes.
Does this specification allow downgrading default security characteristics?
No.

Appendix D. Default style sheet additions for HTML

This appendix is informative. Potential additions to the base style sheet to express HTML form controls, and a few dynamic presentation attributes:
	:enabled:focus {
		outline: 2px inset;
	}

	button,
	input[type=button],
	input[type=reset],
	input[type=submit],
	input[type=checkbox],
	input[type=radio],
	textarea,
	input,
	input[type=text],
	input[type=password],
	input[type=image] {
		display: inline-block;
	}

	input[type=button],
	input[type=reset],
	input[type=submit],
	input[type=checkbox],
	input[type=radio],
	input,
	input[type=text],
	input[type=password],
	input[type=image] {
		white-space: nowrap;
	}

	button {
		/* white space handling of BUTTON tags in particular */
		white-space:normal;
	}

	input[type=reset]:lang(en) {
		/* default content of HTML input type=reset button, per language */
		content: "Reset";
	}

	input[type=submit]:lang(en) {
		/* default content of HTML input type=submit button, per language */
		content: "Submit";
	}

	/* UAs should use language-specific Reset/Submit rules for others. */

	input[type=button],
	input[type=reset][value],
	input[type=submit][value] {
		/* text content/labels of HTML "input" buttons */
		content: attr(value);
	}

	textarea {
		/* white space handling of TEXTAREA tags in particular */
		white-space:pre-wrap;
		resize: both;
	}

	input[type=hidden] {
		/* appearance of the HTML hidden text field in particular */
		display: none !important;
	}

	input[type=image] {
		content: attr(src,url);
		border: none;
	}

	select[size] {
		/* HTML4/XHTML1 <select> w/ size more than 1 - appearance of list */
		display: inline-block;
		height: attr(size,em);
	}

	select,select[size=1] {
		/* HTML4/XHTML1 <select> without size, or size=1 - popup-menu */
		display: inline-block;
		height: 1em;
		overflow: hidden;
	}

	select[size]:active {
		/* active HTML <select> w/ size more than 1 - appearance of active list */
		display: inline-block;
	}

	optgroup, option {
		display: block;
		white-space: nowrap;
	}

	optgroup[label],option[label] {
		content: attr(label);
	}

	option[selected]::before {
		display: inline;
		content: check;
	}

	/* Though FRAME resizing is not directly addressed by this specification,
	   the following rules may provide an approximation of reasonable behavior. */

	/*

	frame { resize:both }
	frame[noresize] { resize:none }

	*/